Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the hose clamp -2- and disconnect the hose for the EVAP system.
-- Always seal off any open lines and connections with plugs that are thoroughly cleaned from the Engine Bung Set:VAS6122 .
All other procedures are described under:CAMSHAFT HOUSING, REMOVING AND INSTALLING .