Fuel Pump Control Module -J538-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Observe the safety instructions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the right rear underbody trim panel. Refer to OVERVIEW - UNDERBODY TRIM PANELS .
-- Release the left and right hooks -2- one at a time using a flat-head screwdriver.
-- At the same time, remove the fuel pump control module -1- from the bracket in direction of -arrow-.
-- Release the connector safety catch and disconnect the connector -3- for the Fuel Pump Control Module -J538-.