Fuel Level Sensor -G-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Pay attention to the safety precautions. Refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Reach through the installation opening in the fuel tank and free up the wire for the Fuel Level Sensor -G- at the baffle housing -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

-- Reach through the installation opening in the fuel tank, release the catch in direction of -arrow B- and at the same time, remove the fuel gauge -1- from the mount on the baffle housing in direction of -arrow C-.

-- Carefully remove the Fuel Level Sensor -G- from the fuel tank opening.

TIP:

Be careful not to bend the floater arm on the fuel level sensor when removing and inserting.