Roof Grab Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the Angled Screwdriver:VAS 6543 -4- in the gap behind the expanding cap -2-.
Conditions
- Unclip the expanding cap only to the lock position.
-- Pivot the angled screwdriver -arrow-, until the expanding cap slides audibly into the lock position.
-- Repeat the procedure on the second expanding cap -3-.
-- Remove the roof grab handle -1- from the opening in the body.
-- Leave the expanding caps in the lock position in the roof grab handle.