LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Interior Trim) >> 70 Interior Trim >> Vehicle Interior Trim Panels >> Sill Panel, Removing And Installing >> Removing

Sill Panel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

 

-- Remove the bench seat. Refer to REAR BENCH SEAT, REMOVING AND INSTALLING .

 

A6 with rigid backrest or individual seat backrest

-- Remove the rear seat backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .

 

Continuation for all vehicles

Vehicles with side cushion

-- Remove the side cushion. Refer to OVERVIEW - COVER AND CUSHION .

 

Continuation for all vehicles

-- Unclip the sill panel -1- from the side sill starting at the front using the Trim Removal Wedge :3409  -arrow A-.

Fig 1: NO CONTENT
GWWA70-12432Courtesy of AUDI OF AMERICA, LLC

-- Pull the sill panel out of the C-pillar -arrow B- and -arrow C- and remove.