Overview - Footrest And Carpet
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
The overview shows a LHD vehicle as an example. For RHD vehicles the layout is a mirror image.
- Bracket for Floor Mat
- Insert from below into the carpet
- Quantity: 2
- Floor Mat Cap
- Unclip using the Pry Lever :80-200
- Press into the bracket until it clicks into place
- Quantity: 2
- Bracket for Floor Mat
- Insert from below into the floor mat
- Quantity: 2
- Floor Mat Cap
- Unclip using the Pry Lever :80-200
- Press into the bracket until it clicks into place
- Quantity: 2
- Footrest
- Engage in the relay and fuse panel
- RHD. Refer to Fig 2.
- Refer to FOOTREST, REMOVING AND INSTALLING, LHD VEHICLES .
- Bolt
- 3 Nm
- Cap
- Press on until it engages audibly
- Carpet
- One piece
- With perforation
- Refer to Carpet, Removing and Installing .
- Floor Mat
- Quantity: 4
Overview - Footrest, RHD
1 -
Footrest
-
If the support bars are broken, the carpet must be replaced
-
Refer to Carpet, Removing and Installing .
2 -
Footrest bracket