B-Pillar Upper Trim Panel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Guide the seat belt webbing with the belt tongue in through the belt height adjuster slider.

-- Make sure that the belt height adjuster is in the lowest position.

-- First, insert the B-pillar trim panel upward into the mount on the roof.

Fig 1: NO CONTENT

Courtesy of AUDI OF AMERICA, LLC

Conditions

The retaining pin -1- must engage in the mount -2- at the belt height adjuster -arrow-.

-- Check the function.