B-Pillar Lower Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat all the way to the front and into the highest position.
-- Unclip the A-pillar lower trim panel -2- from the B-pillar lower trim panel -arrow B-.
-- Unclip the sill panel -1- from the B-pillar lower trim panel -arrow B- -arrow A-.
-- Free up the trim panel -1- near the door seals and remove by hand from the B-pillar upper trim panel -A arrows-.
-- Unclip the trim panel -1- with Pry Lever :80-200 from the B-pillar -arrows B-.
-- Release the seat belt guide -3- and guide out seat belt webbing -2-.
-- Remove the trim panel -1- upward.