Window Frame Trim Panel, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the trim panel -2- in the upper front section of the window guide -1- -arrow-.
-- Install trim panel -2- along the entire length of the window guide.
-- Remove the protective film from the new adhesive pads -1- and -3-.
-- Push the trim panel firmly against the door in the adhesive pad area -1- and -3-.