Rear Lid Lower Trim Panel, Removing And Installing, A6 AVANT: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- If installed, remove the rear lid closing button. Refer to REAR LID CONTROL HEAD EX58, REMOVING AND INSTALLING .
-- Remove the rear lid lamp. Refer to COMPONENT LOCATION OVERVIEW - LUGGAGE COMPARTMENT LAMPS .
-- Turn the quick release -1- 90° counter-clockwise and move the cover -2- to the side -arrow-.
-- Remove the emergency triangle.
-- Disengage the cover -2- at the lower trim panel and remove it.
-- If installed, remove the bolts -1- and -2-.
-- Starting from the top, unclip the trim panel -1- from the rear lid -arrows- using the Removal Wedge :T40233 .
-- Remove the trim panel -1-.
-- If necessary, release the locking tabs -arrows A-.
-- Remove the rear lid latch trim panel -1- -arrow B-.