Rear Center Console Vent, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seats all the way forward.
TIP:
The vent has a hole -2- on both sides for attaching the Hook Tool :T40207 .
-- Carefully insert the Hook Tool :T40207 between the slats and hook it into the side of the vent.
-- Remove the vents -1- on both sides alternating from side to side in the direction of -arrows-.
-- Unclip the vent at the bottom from the center console and remove from the installation opening.
-- Disconnect the connectors.