Guidelines For Clean Working Conditions

WARNING: This page is about a different car, the 2024 Audi S6, 2024 Audi A6 Quattro, 2024 Audi A3 Quattro, and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Thoroughly clean the connection points and the surrounding area before loosening.
Clean the transmission and transmission components using the Cleaning Solution --.
Use lint-free cloths for cleaning, for example, the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.
Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set:VAS 6122 .
Place the removed parts on a clean surface and cover them. Use foil or lint-free cloths.
Carefully cover or seal opened components if the repair will not be done immediately.
Only install clean parts: remove the replacement parts from their packaging just before installing them.
Protect the disconnected connectors from dirt and moisture and only connect when they are dry.