Component Location Overview - Seat Occupant Detection System
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- Seat position sensor/passenger occupant detection sensor/seat belt switch
- Refer to Seat Position Sensor, Removing and Installing .
- Wiring Harness
- For the seat heating element with seat occupant detection system
- Refer to Seat Occupant Detection System, Removing and Installing .
- Seat Occupant Detection System Control Module -J706-
- Bolt
- Installed depending on vehicle equipment
- 1.5 Nm
- Control Module Bracket
- Installed depending on vehicle equipment
- Clip into the seat pan
- Front Passenger Seat Heating Element with Passenger Occupant Detection System Control Module -ZX14-
- With Front Passenger Seat Heating Element -Z8- /Passenger Seat Occupant Detection Sensor -G128-
- The seat occupant detection system is bonded on the cushion
- Refer to Seat Occupant Detection System, Removing and Installing .
- Nut
- 1.5 Nm
- Seat Position Sensor
- Shown on the front passenger side
- With Driver Seat Position Sensor - G553- /Front Passenger Seat Position Sensor - G554-
- Refer to Seat Position Sensor, Removing and Installing .
- Bolt
- Refer to Overview - Seat Position Sensor .