Seat Belt Height Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the seat belt height adjuster slider to the lowest position.
-- Remove the B-pillar upper trim panel and move to the side with the seat belt webbing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the bolt -4-.
-- Remove the seat belt relay -1- with the seat belt webbing.
-- Remove the bolt -3-.
-- Remove the belt height adjuster -2- upward.