Rear Outer Seat Belt Guide, Removing And Installing, A6 AVANT: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Press the seat belt guide trim -1- out of the retainers -2- and -3- using the Trim Removal Wedge:3409 and remove the trim.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the side cushion. Refer to OVERVIEW - COVER AND CUSHION .

-- Remove the luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM , or LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITH HIGH-VOLTAGE SYSTEM .

-- Push the side window noise insulation in the seat belt guide area to the side.

-- Release the catches -arrows- one after the other and turn the seat belt guide -1- counter-clockwise at the same time.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat belt guide -1- and guide out the seat belt.

-- Remove the belt from the seat belt guide -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow-.

-- Disengage the seat belt guide -1- from the mount and remove.

-- If equipped, on the right side of the vehicle: disconnect the connector for the parking aid warning buzzer.