Outer Rear Belt End Fitting, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bench seat. Refer to REAR BENCH SEAT, REMOVING AND INSTALLING .
A6 with rigid backrest or individual seat backrest
-- Remove the rear seat backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Continuation for all vehicles
Vehicles with side cushion
-- Remove the side cushion. Refer to OVERVIEW - COVER AND CUSHION .
Continuation for all vehicles
A6 China
-- If necessary, loosen the sill panel and push it to the side. Refer to SILL PANEL, REMOVING AND INSTALLING .
Continuation for all vehicles
-- Remove the bolt -1- on the belt end fitting -2-.