Knee Airbag With Igniter, Removing And Installing, Front Passenger Side: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the glove compartment. Refer to Glove Compartment, Removing and Installing .

-- Open the glove compartment lid, lift the insert -1- and remove it.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1-.

-- Lower the knee airbag -1- and disengage at the inside of the glove compartment -A arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Tilt the knee airbag -1- downward, disengage at the glove compartment -B arrows- and remove.

-- Place the knee airbag -1- on a soft surface with the collision cushion facing upward.