Windshield Wiper Arms, Removing And Installing: Removing

Conditions

• If the windshield wiper motor should run during the procedure, the hood must be closed.

-- Pry the caps -arrows- off of the windshield wiper arms -1- with a screwdriver.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2-.

-- Puller - Windshield Wiper:T40394  , preparing

Courtesy of AUDI OF AMERICA, LLC

-- Turn the bolt -3- all the way upward.

-- Push the locking ring -4- upward -arrow-.

-- Remove the hook -1-.

-- Pivot the second hook -2- to the side.

-- Position the hook -2- on the windshield wiper arm -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Position the puller on the opposite side and latch the pivoting hook -3-.

-- Push the locking ring -4- downward -arrow-.

-- Turn the bolt -5- clockwise until the windshield wiper arm is removed from the windshield wiper axle.

-- Remove the wiper arm.