Windshield Wiper Motor V, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
If the Windshield Wiper Motor -V- is replaced, the test plan for replacing the control module must be performed.
-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the windshield wiper arms. Refer to Windshield Wiper Arms, Removing and Installing .
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the bolts -arrows-.
-- Remove the windshield wiper frame -2- with the linkage and windshield wiper motor.