Windshield Wiper Motor V, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the windshield wiper motor with the windshield wiper frame into the vehicle.
-- Tighten the bolts.
-- Refer to Windshield Wiper Arms, Adjusting .
If the Windshield Wiper Motor -V- was replaced, the test plan for replacing the control module must be completed.
-- Complete the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation