Washer Fluid Reservoir, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the washer fluid reservoir filler neck. Refer to Washer Fluid Reservoir Filler Neck, Removing and Installing .

-- Remove the right front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Disconnect the connector -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wires -1- and -2-.

-- Remove the nut -5-.

-- Remove the bolt -3-.

-- Remove the washer fluid reservoir -7- toward the front until the pumps are accessible.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -2- -4- and -5-.

-- Free up the wires -6-.

-- Place a drip tray under the washer fluid reservoir.

-- Disconnect the washer fluid hoses -1-, -3-, -8- and -9- from the pumps.

-- Remove the windshield washer fluid reservoir.