LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Rear Window Washer System >> Washer Nozzle, Adjusting

Washer Nozzle, Adjusting

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Washer Nozzle, Adjusting

-- Adjust the spray nozzles for the rear window washer system. Refer to Maintenance; Window Washer System; Spray Pattern, Checking and Adjusting.

-- Clean the dirty washer nozzle if the spray field does not match the specifications.

 

Washer Nozzle, Cleaning

CAUTION:

There is a risk of damaging the washer nozzles through improper handling.

- Do not use any objects to clean the washer nozzles.

-- Remove the spray nozzle. Refer to Rear Window Washer System Washer Nozzle, Removing and Installing.  .

-- Rinse the washer nozzle with clean water opposite the spray direction.

-- To remove any remaining contaminants, the washer nozzle may only be blown out with compressed air in the opposite direction of the spray direction.

-- If the spray field still does not correspond to the specifications, replace the washer nozzle.