Rear Window Washer Pump V13, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the washer fluid reservoir until the Rear Window Washer Pump -V13- is accessible. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Place a drip tray under the washer fluid reservoir.
-- Release and remove the washer fluid hose -4-.
-- Remove the rear window washer pump -2- upward.