Rear Body Acceleration Sensor -G343-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Do not interchange the rear body acceleration sensor with the front body acceleration sensor; Refer to the Electronic Parts Information (ETKA) for the allocation.
- When installing align the body acceleration sensor to the alignment pin.