Part II
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Part I. Refer to Part I .
- Oil Return Line
- Replace after removing
- Clip
- Lower Air Duct Pipe
- Overview. Refer to OVERVIEW - CHARGE AIR SYSTEM, 2.9L ENGINE-SIDE .
- Bolt
- Tightening specification -item 31- OVERVIEW - CHARGE AIR SYSTEM, 2.9L ENGINE-SIDE => List Item:Bolt.
- Seals
- Replace after removing
- Air Duct Pipe
- Bolt
- 9 Nm
- Vacuum Diaphragm
- For the turbocharger
- There are different versions. Repair set. Refer to the Parts Information
- Removing and Installing. Refer to TURBOCHARGER VACUUM DIAPHRAGM, REPLACING .
- Nut
- 8 Nm
- Threaded Piece
- Locking Spring
- Replace after removing
- Ball Socket
- Nut
- 8 Nm
- Nut
- 9 Nm
- Turbocharger
- Shown for cylinder bank 2 (left)
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Nut
- Replace after removing
- Tightening Specifications:
- Step 1: 15 Nm
- Step 2: 30 Nm
- Step 3: After finishing the procedures, tighten the nuts to 30 Nm
- Nut
- 30 Nm
- Tensioning Bracket
- Seal
- Replace after removing
- Stud Bolt
- 15 Nm
- Replace