Shock Absorber: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Install shock absorber.
-- Install threaded cap together with cover cap.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Reach between spring coils and install the boot carefully on threaded cap.
-- Install individual parts.
-- Tighten nut using using torque wrench and special tool :3078
.
 Courtesy of AUDI OF AMERICA, LLC
|
Tightening torque: 60 Nm (44 ft lb)