Fig. 7 Removing rear subframe bushing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
CAUTION:
When removing the rear subframe bushing, the vehicle must be standing on its wheels.
-- Thread puller (such as Kukko No. 22/1) onto threads of extractor until two jaws are supported on subframe assembly.
-- Tighten nuts on puller spindle until bushing is pulled off.