Glove Compartment Lamp Switch E26, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Press the operating arm -3- out of the locking mechanism -arrow A-.
-- Release the Glove Compartment Lamp Switch -E26- -1- counter-clockwise -arrow B- and remove.