Rear Cigarette LIGHTERU9/12 V Socket 2 U18, Removing And Installing: Removing

-- Remove the cigarette lighter/blind cover.

-- Insert the release tabs -2- of the Cigarette Lighter Release Tool :T40148  into the recesses at the Rear Cigarette Lighter -U9- -3- -arrow-.

Fig 1: 12 V Socket 5 -U26-

Courtesy of AUDI OF AMERICA, LLC

Conditions

• The threaded rod -1- is moved all the way downward.

-- Insert the cigarette lighter release tool -1- all the way.

Courtesy of AUDI OF AMERICA, LLC

-- Turn the thumbwheel -2- at the release tool clockwise all the way to the end stop.

-- The plunger -2- is pulled up and the release tabs -1- are spreading in the puller -arrows-.

Fig 2: Identifying Release Tool T40148 In Use

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cigarette lighter from the illumination ring using the cigarette lighter release tool.

-- Guide the wire out through the mount.