LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Interior Lights, Switches) >> 96 Interior Lights, Switches >> Cigarette Lighter And Socket >> Rear Cigarette LIGHTERU9/12 V Socket 2 U18, Removing And Installing >> Installing

Rear Cigarette LIGHTERU9/12 V Socket 2 U18, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

 
CAUTION:

There is a risk of injury if removing the cigarette lighter from the socket while it is still glowing.

- Check the tabs on the socket.

- After removing the socket, push the springs back together carefully.

-- Remove the support -1- from the cigarette lighter release tool.

Fig 1: Identifying Support, Thumbwheel, Release Tabs, Release Tool T40148 & Cigarette Lighter
GWWA90-10091Courtesy of AUDI OF AMERICA, LLC

-- Slide the piston down and hold it in place.

-- Turn the thumbwheel -4- counter-clockwise -arrow-. This loosens the release tabs -2- on the cigarette lighter -3-.

-- Remove the puller.