Overview - Headlamps, Matrix Low Led Headlamps
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Breather Hose
- Headlamp Housing
- Refer to Headlamp Housing, Removing and Installing .
- Mount
- Bolt
- Quantity: 4
- 1.5 Nm
- Bolt
- Quantity: 3
- 1.5 Nm
- LED Headlamp Power Output Module 1
- Right LED Headlamp Power Output Module 1 -A27-
- Left LED Headlamp Power Output Module 1 -A31-
- Refer to RIGHT AND LEFT LED HEADLAMP POWER OUTPUT MODULE 1 A27/A31, REMOVING AND INSTALLING, A6 .
- Adjusting Nut
- For headlamp height adjustment
- Washer
- Bolt
- 4.5 Nm
- Bolt
- 4.5 Nm
- Plug
- Market-Specific Version
- LED Module 2
- Left High Beam Headlamp Bulb -M30-
- Right High Beam Headlamp Bulb -M32-
- Refer to LED MODULE 2, REMOVING AND INSTALLING
- Bolt
- Quantity: 4
- 1.5 Nm
- Cap
- LED Module 1
- Left Low Beam Headlamp Bulb -M29-
- Right Low Beam Headlamp Bulb -M31-
- Refer to LED MODULE 1, REMOVING AND INSTALLING
- Bolt
- Quantity: 4
- 1.5 Nm
- Headlamp Beam Adjustment Motor Housing Cover
- Bolt
- Quantity: 4
- 1.5 Nm
- Bolt
- 4.5 Nm
- Adjuster
- For adjusting the headlamp housing to the bumper contour
- Bolt
- Quantity: 2
- 1.5 Nm
- Headlamp Beam Adjustment Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Refer to LEFT AND RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR V48/V49, REMOVING AND INSTALLING, A6 .
- Sealing Frame
- Adjuster
- For adjusting the headlamp housing to the bumper contour
- Bolt
- 4.5 Nm
- Filter Membrane