Overview - Headlamps, Matrix High Led Headlamps
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Breather Hose
- Headlamp Housing
- Refer to Headlamp Housing, Removing and Installing .
- LED Headlamp Power Output Module 1
- Right LED Headlamp Power Output Module 1 -A27-
- Left LED Headlamp Power Output Module 1 -A31-
- Refer to RIGHT AND LEFT LED HEADLAMP POWER OUTPUT MODULE 1 A27/A31, REMOVING AND INSTALLING, A6 .
- Bolt
- Quantity: 3
- 1.5 Nm
- Adjusting Nut
- For headlamp height adjustment
- Washer
- Bolt
- 4.5 Nm
- Housing Cover
- Bolt
- Quantity: 4
- 1.5 Nm
- Bolt
- 4.5 Nm
- Plug
- Market-Specific Version
- Bolt
- Quantity: 2
- 1.5 Nm
- Headlamp Beam Adjustment Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Refer to LEFT AND RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR V48/V49, REMOVING AND INSTALLING, A6 .
- Mount
- For headlamp beam adjustment motor
- Bolt
- Quantity: 2
- 1.5 Nm
- Bracket
- For headlamp fan
- Bolt
- Quantity: 2
- 1.5 Nm
- Headlamp Fan
- Left Headlamp Fan -V407-
- Right Headlamp Fan -V408-
- Refer to Left and Right Headlamp Fan V407/V408, Removing and Installing .
- Matrix Headlamp Power Output Module
- Left Matrix Headlamp Power Output Module -A44-
- Right Matrix Headlamp Power Output Module -A45-
- Refer to LEFT AND RIGHT MATRIX HEADLAMP POWER OUTPUT MODULE A44/A45, REMOVING AND INSTALLING
- Bolt
- 4.5 Nm
- Bolt
- Quantity: 4
- 1.5 Nm
- Housing Cover
- Adjuster
- For adjusting the headlamp housing to the bumper contour
- Sealing Frame
- Adjuster
- For adjusting the headlamp housing to the bumper contour
- Bolt
- 4.5 Nm
- Filter Membrane