LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Headlamps >> Left And Right Headlamp Fan 2 V463/V464, Removing And Installing, Laser High Beams >> Left And Right Headlamp Fan 2 V463/V464, Removing And Installing >> Removing

Left And Right Headlamp Fan 2 V463/V464, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the headlamp washer system washer nozzle and move it to the side with the washer fluid hose still attached. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE, REMOVING AND INSTALLING .

 

-- Remove the bolts -arrows-.

GWWA94-12292Courtesy of AUDI OF AMERICA, LLC

-- Remove the housing cover -1-.

 

-- Remove the bolt -arrow-.

GWWA94-12293Courtesy of AUDI OF AMERICA, LLC

-- Remove the fan -2- downward.

-- Disconnect the connector -1-.

 

-- Remove the bolts -arrows-.

GWWA94-12297Courtesy of AUDI OF AMERICA, LLC

-- Remove the fan -1- from the bracket -2-.