Alcohol Interlock System, Initial Operation

Connect the alcohol interlock system

-- Pay attention to the manufacturers instructions when installing and connecting the control module.

-- Connect the battery. Refer to BATTERY A, DISCONNECTING AND CONNECTING, VEHICLES WITHOUT ALTERNATIVE DRIVE SYSTEM, (0K0) / BATTERY A, DISCONNECTING AND CONNECTING, VEHICLES WITH HIGH-VOLTAGE SYSTEM, (0K3) / BATTERY A, DISCONNECTING AND CONNECTING, VEHICLES WITH ALTERNATIVE DRIVE SYSTEM, (0K4) .

A4/A5

-- Insert a 20 A fuse in Fuse Panel 3 - ST3- in location 5 in the left side of the luggage compartment.

Continuation for all vehicles

A6/A7

-- Insert the Fuse 15 (On Fuse Panel M) -SM15- 20 A in the left front side of the luggage compartment.

Continuation for all vehicles

A8

-- Insert a 20 A fuse in Fuse Panel J -SJ- in location SJ12 in the luggage compartment on the left side.

Continuation for all vehicles

Q8 e-tron

-- Connect the fuse 20 A to the Fuse Panel C -SC- at location SC3 in the front passenger footwell.

Continuation for all vehicles

e-tron GT

-- Insert a 20 A fuse in Relay and Fuse Panel 4 -SR4- in location SK5 in the luggage compartment on the right side.

Continuation for all vehicles

Q4 e-tron

-- Connect the fuse 20 A in the left front footwell in the Fuse Panel C -SC- on the additional fuse panel.

Continuation for all vehicles

Q5

-- Insert a 20 A fuse in Fuse Panel 3 -ST3- in location 6 in the left side of the luggage compartment.

Continuation for all vehicles

Q7/Q8

-- Insert a 20 A fuse in Fuse Panel J -SJ- in location SJ9 in the luggage compartment on the left side.

Continuation for all vehicles

Perform a software update

-- Connect the Vehicle Diagnostic Tester.

-- Select "flash".

-- Select "Enter SVM code".

-- Perform the software update with SVM code -46A510-.

Start the alcohol interlock system.

-- Perform a function test following manufacturer instructions.