Rear Lid Closing Assist Motor -V382-, REMOVING AND INSTALLING, A6 SEDAN: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Disengage the support bracket -1- by releasing the retainers in direction of -arrows-.
-- Release the release cable nipple -4- from the operating lever -3-.
-- Release the catches -1, 3, 4- 90° clockwise in direction of -arrow-.
-- Remove the Rear Lid Closing Aid Motor -V382- -2-.