LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer, Removing And Installing >> Adjusting Buffer, Removing And Installing, A6 AVANT And A7 SPORTBACK >> Installing

Adjusting Buffer, Removing And Installing, A6 AVANT And A7 SPORTBACK: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .