LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer Stop, Removing And Installing >> Removing

Adjusting Buffer Stop, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolt -1- and the stop -2-.

Fig 1: Identifying Stop, Rear Lid Side
GWWA55-10459Courtesy of AUDI OF AMERICA, LLC