Latch Release Cable, Removing And Installing, RS6, RS7 SPORTBACK: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the latch. Refer to LATCH, REMOVING AND INSTALLING .
-- Release the catches -1 and 3- and remove the coupling -2- from the lock carrier -4-.
-- Release the retainers in direction of -arrows- and remove the housing cover -1-.
-- Loosen the release cable -4- from the support bracket -3- and disengage the release cable nipple -2-.
-- Free up the release cables and guide them out of the lock carrier.