Mounting Bracket With Hook Operating Lever Release Cable, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the latch and free up the release cable to the operating lever hook on the latch. Refer to LATCH, REMOVING AND INSTALLING .
-- Free up the connectors and wiring harness on the mounting bracket.
-- Remove the bolt -arrow-.
-- Pull the mounting bracket -1- forward out of the guide -2- and remove.