Latch Release Lever, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the clip -2- out of the release lever -1- slightly in direction of -arrow A- using a small screwdriver.
-- Pull the operating lever toward the rear in direction of -arrow B- to release the hood and hold it in this position.
-- At the same time, pull the release lever so it is level with the center of the vehicle and out of its mount in direction of -arrow C-.