Latch Release Lever Mounting Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the latch release lever. Refer to LATCH RELEASE LEVER, REMOVING AND INSTALLING .
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Loosen the release cable -3- from the mounting bracket support bracket -2- and disengage the release cable nipple -1-.
-- Remove the bolts -arrows-.
-- Remove the mounting bracket -1-.