Hood, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Equipped on some models: remove the washer nozzles. Refer to WASHER NOZZLES, REMOVING AND INSTALLING .
-- Guide the wiring harness out of the hood and free it up.
-- Remove the nuts -arrows- from the hinge.
-- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
-- Remove the hood -1-.