Height, Adjusting Using Adjusting Buffer

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .

Special tools and workshop equipment required

Gauge - Gap Adjustment :3371

Fig 1: Gap Adjustment Gauge (3371)
Courtesy of AUDI OF AMERICA, LLC

Procedure

-- Open the hood and release the retainer -1- in direction of -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the stop -3- on the adjusting buffer -2- completely.

-- Place the hood slowly on the stop until the hood gap dimension to the fender is reached.

-- Open the hood and lock the retainer -4- in direction of -arrow B-.