Overview - Charge Door Unit

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Charge Door Unit (Charging Socket)

Courtesy of AUDI OF AMERICA, LLC

Charge Door Unit Trim
- Removing and Installing. Refer to CHARGE DOOR UNIT TRIM, REMOVING AND INSTALLING .
Charge Door Unit
- Always replace after removing
- Removing and Installing. Refer to CHARGE DOOR UNIT, REMOVING AND INSTALLING .
High-Voltage Charge Door Lock 1 Adjuster -F496-
- Removing and Installing. Refer to High-Voltage Charge Door Lock 1 Adjuster -F496-, REMOVING AND INSTALLING .
Bolt
- 1.5 Nm
- Quantity: 2
Emergency Release Cable
- Present depending on the version
- Removing and Installing. Refer to EMERGENCY RELEASE CABLE FOR HIGH-VOLTAGE CHARGE DOOR LOCK, REMOVING AND INSTALLING .
Battery Charging Button Module -EX32-
- With Charging Socket 1 LED Module -L263-, Immediate Charging Button -E766-, Charging Profile Selection Button -E808-
- Overview. Refer to OVERVIEW - CHARGING SOCKET
Information Label
- On the charge door unit
Charging Socket Cap