LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Hood, Lids) >> 55 Hood, Lids >> Charge Door Unit >> Charge Door Unit, Removing And Installing >> Removing

Charge Door Unit, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the luggage compartment left side trim panel cover.

-- Disengage the handle for the emergency release cable and free it up.

-- Open the charge door unit.

-- Remove the charging socket cap.

-- Release the charge door unit at the markings -arrows- pierce using a small screwdriver at the markings.

GWWA55-11322Courtesy of AUDI OF AMERICA, LLC

-- Upper catch: position a screwdriver over the catch -1- and release with the screwdriver in direction of -arrow A-.

GWWA55-11310Courtesy of AUDI OF AMERICA, LLC

-- Lower catch: position a screwdriver under the catch -3- and release with the screwdriver in direction of -arrow B-.

-- Close the charge door unit.

-- Remove the charge door unit from the opening in the body.

-- Disconnect the connectors -1 and 2-.

GWWA55-11323Courtesy of AUDI OF AMERICA, LLC

-- Remove the charge door unit at the same time guide out the emergency release cable -3-.