Rear Bench Seat, Removing And Installing: Removing

-- Move the front seats all the way forward.

-- Unclip the child seat anchor cover -1- from the anchor -arrow- and remove.

Fig 1: Unclipping Latch Child Seat Anchor Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Push the child seat anchor guide -1- downward according to the cut-out, and disengage it from the anchor -2-.

Fig 2: Pushing Latch Child Seat Anchor Guide -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the child seat anchor guide forward -arrow-.

-- Repeat the process on the rest of the child seat anchor guides.

-- Grab the rear bench seat -1- under the molded part using both hands on one side.

Courtesy of AUDI OF AMERICA, LLC

-- Using both hands on one side, forcefully pull the rear bench seat upward -arrow A- to release the molded part from the front mount.

-- Repeat the procedure in the center -arrow B- and on the opposite side of the rear bench seat -arrow C-.

-- Press the rear bench seat back at the side and pull it upward so that the molded part releases from the mount.

-- Equipped on some models: disconnect the connectors.

-- Remove the rear bench seat.