Inner Mounting Pin, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the folding backrest from the center bearing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
-- Right folding backrest: unscrew the mounting pin -3- and remove with the bearing sleeve -2- and washer -1-.
-- Left folding backrest: remove the chafe protection -4-, unscrew the mounting pin -5- and remove with the bearing sleeve -6-.