Seat Height Adjuster, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat all the way forward and up.

-- Remove the handle for the seat height adjustment to the side from the seat -arrow- using the Trim Removal Wedge :3409 .

Courtesy of AUDI OF AMERICA, LLC

TIP:

Courtesy of AUDI OF AMERICA, LLC

If the handle cannot be removed, proceed as follows:

-- Slide the Trim Removal Wedge :3409 between the handle -1- and the seat frame trim panel -2-.

-- To protect the seat trim panel, place a cloth -3- between the trim panel and Puller - Unit Injector Puller - Unit Injector :T10055 before positioning the tool.

-- Position the Puller - Unit Injector :T10055 as shown on the lever and remove the lever from the seat -arrow-.

-- To remove the seat height adjustment adapter -1-, remove the seat frame trim panel on the side sill side. Refer to SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING, STANDARD/SPORT/SUPER SPORT SEAT .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the adapter.