Seat Frame Trim Panel, Removing And Installing, Standard/Sport/Super Sport Seat: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat into its highest position.

-- Equipped on some models: remove the backrest adjustment hand wheel. Refer to BACKREST ADJUSTER, REMOVING AND INSTALLING .

-- Equipped on some models: remove the seat height adjustment handle. Refer to SEAT HEIGHT ADJUSTER, REMOVING AND INSTALLING .

-- Release the hooks -1- using a flat-head screwdriver.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the expanding rivet -3-.

-- Detach the rear of the seat frame trim panel -2- at the bracket -arrow A-.

-- Remove the seat frame trim panel upward from the bracket -B arrows-.

-- Equipped on some models: disconnect the connectors by pressing the release.

Courtesy of AUDI OF AMERICA, LLC

1, 2 -

Driver Seat Adjustment Control Head Driver Seat Adjustment Control Head -E470- / Front Passenger Seat Adjustment Control Head Front Passenger Seat Adjustment Control Head -E471-

3 - Driver Seat Switch Module Driver Seat Switch Module -E663- /Front Passenger Seat Switch Module Front Passenger Seat Switch Module -E664-

-- Free up the wiring harness.

-- Remove the seat frame trim panel on the side sill side.

-- If necessary, remove the bolts -arrows- and remove the seat frame trim panel bracket -1-.

Courtesy of AUDI OF AMERICA, LLC