Seat Frame Trim Panel, Removing And Installing, Front Comfort Seat: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat all the way to the rear in its highest position.
-- Move the seat depth adjuster toward the rear.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Unclip the front seat frame trim panel -1- from the retainers one at a time.
-- To do this, press the seat frame trim panel forward, and release the hooks -arrows- with a flat-head screwdriver while holding the trim in place.